A range of compressor oils suitable for high discharge temperature applications containing anti-oxidants extreme pressure and anti-wear performance additives. Suitable for air compressors of type VD-L 100 in accordance with DIN 51 506. Suitable for use in rotary vane and screw type compressors.
A range of compressor oils suitable for high discharge temperature applications containing anti-oxidants extreme pressure and anti-wear performance additives. Suitable for air compressors of type VD-L 100 in accordance with DIN 51 506. Suitable for use in rotary vane and screw type compressors.
A range of compressor oils suitable for high discharge temperature applications containing anti-oxidants extreme pressure and anti-wear performance additives. Suitable for air compressors of type VD-L 100 in accordance with DIN 51 506. Suitable for use in rotary vane and screw type compressors.
High quality straight paraffinic type material oils suitable for most general purpose machine applications. The higher viscosity grades maybe used for circulating systems, bearing and many gearbox applications, not working under extreme pressure (EP) conditions. 
Available in ISO VG 5, 10,15, 22, 32, 46, 68, 100, 150, 220, 460 & 680 Please contact our office for current prices on other grades.
A range of machine tool lubricants designed to give optimum performance on slideways and machine beds, thus eliminating the stick slip often associated with poor component surface finish and vibration whilst resisting the problems of wash off by soluble coolants and tramp oil contamination.
Available in ISO VG 32, 68, 100, 150 & 680 Please contact our office for current prices on all other grades.
Excelfluid NP is a cost effective, non EP, milky soluble cutting fluid. It is designed for general purpose machining with good performance in both hard and soft water.
A range of heavy duty gear oils for industrial enclosed gear sets with circulation or splash feed lubrication systems. These oils contain a high level of anti-wear, anti-foam properties together with a fully oxidation inhibited extreme pressure additives. Benefits include excellent water shedding, thermal stability, reduced tooth wear and excellent corrosion protection ensuring long service life.
Available in ISO VG 68, 100, 150, 220, 460 & 680 Please contact our office for current prices on all other grades.
General purpose non-staining extreme pressure low odour milky soluble oil. Used for machining a wide range of ferrous and non-ferrous materials including tough steels and aluminium alloys. Non phenolic.
Biostable semi synthetic high dilution, long life, general purpose odourless cutting fluid suitable for use on conventional and CNC machines.
A fully synthetic nitrite free grinding fluid which has excellent fines separation and emulsion longevity. Highly recommended for grinding tungsten carbide due to the low cobalt leeching effect.
Superior compressor oil which allows for long periods between maintenance. For use in compressors with or without oil injections.
ISO VG 46
A cost effective medium viscosity neat cutting oil suitable for the light to medium machining of ferrous and non ferrous materials especially free cutting bronzes etc. Excelcut 401 is bland in odour and straw in colour.
A medium viscosity neat cutting oil containing high levels of chlorinated additives. It is suitable for medium duty machining, milling tapping, turning and automatic spindle work of mild steels and non ferrous materials. Excelcut 427 is bland on odour and straw in colour.
A medium viscosity neat cutting oil. It is totally chlorine free, an important feature when considering fluid disposal and recycling. It is suitable for medium duty machining, hobbing, threading and tapping, multi-spindal and screw automatic, milling and turning of all tensile steels including stainless and non ferrous metals. Excelcut 430 is bland in odour and straw in colour.
A Heavy duty, medium viscosity neat cutting oil containing very high levels of chlorinated and controlled release sulphur additives. It is suitable for heavy duty machining, gear hobbing and shaping, threading and tapping, multi-spindle and screw automics on mild, medium and high tensile steels, including stainless and non ferrous materials. Excelcut 432 is mild in odour and straw in colour.
A low viscosity neat cutting oil containing very high levels of controlled release sulphurised additives making it suitable for heavy duty machining, deep hole drilling, trepanning, broaching and high speed gear generation of mild, medium and high tensile steels including stainless and non ferrous metals. Excelcut 433 is mild in odour and straw in colour.
High technology development of Excelfluid GP. With the addition of extreme pressure and lubricity additives which enhance the fluids cutting performance. For use on tough alloy steels and non ferrous metals.
A blue opaque emulsion with excellent biostability and EP performance, suitable for use in both hard and soft water conditions. This product is multi metal compatible and is designed for use on C.N.C. machines and deep hole boring operations.
Biostable soluble cutting fluid concentrate formulated with very high levels of extreme pressure additives and fortified with a unique blend of fatty esters, which synergistically react to give extremes in cutting performance. Designed for use in the machining of the toughest ferrous metals and difficult to machine aluminium alloys. It can be used in applications where neat oil is normally considered.
A blend of surface active and hydrodynamtic lubrication additives providing a true alternative to neat oils. Excellent in very soft water areas. Provides a high degree of machine tool lubrication.
A dark coloured, low viscosity, extremely high EP treated product suitable for use in applications such as deep drawing etc. Giving excellent surface finish over a wide range of operating temperatures. Suitable for use on ferrous-based work only.
ISO VG 32
Avery light viscosity forming and stamping lubricant suitable for all materials, containing a mild corrosion inhibitor for post pressing protection.
ISO VG 5
An extremely heavy duty metal forming and pressing lubricant suitable for use on alloy wheels, stainless and nimonics, can also be used for deep drawing, cold heading, blanking and piercing operations.
KINEMATIC VISCOSITY @ 40C 130 cSt
A normal speed quench oil for general heat treatment application.
ISO VG 22
A semi-accelerated quench oil where a faster quench is desired.
ISO VG 22
The Theme HT range is suitable for use in heat transfer systems using transfer temperatures up to 32°C (dependant on grade chosen and system design). The Theme range features a very high, long term thermal stability but as with all fluids working at high temperatures it is recommended that regular monitoring checks are carried out to obtain optimum fluid and system efficiency.
Please contact our office for current prices on ISO VG 22,68 and 100
| Universal antifreeze which meets BS6580 standard and provides year round protection to cooling systems of cast iron and alloy engines. | ||
 |
||
|
||
|
||
Copyright © 2008 Consols Oils a Slightly Different solution